HARLEY DAVIDSON FXD (DYNA) PASSENGER FLOOR BOARDS AND RELOCATION ARMS...
download 1. Beginning on the RIGHT side, use a 9/16″ wrench to remove the bolt from the back of the passenger peg mount. Remove entire peg assembly. 2. Remove the new floorboards and mounts from their...
View Article1994 HARLEY DAVIDSON FXD (DYNA) PASSENGER FLOOR BOARDS AND RELOCATION ARMS...
download 1. Beginning on the RIGHT side, use a 9/16″ wrench to remove the bolt from the back of the passenger peg mount. Remove entire peg assembly. 2. Remove the new floorboards and mounts from their...
View ArticleJMJ-1500 Motorcycle/ ATV Jack OWNER'S MANUAL
download 1. Secure hydraulic ram (20) to the lift base (4) with two screws (21 & 21A). 2. Insert foot pedal assembly (19) into hole over pump piston and secure it with screw (19A) and flat washer...
View ArticleHARLEY DAVIDSON BILLET SHIFTER PEG INSTALLATION MANUAL
download Kit Contents See Figure 1 and Table 1. INSTALLATION 1. Remove and discard the original equipment shifter peg. If needed, use a heat gun to apply heat to the shift lever and shifter peg threads...
View ArticleKawasaki Nerf Bar / Heel Guard INSTALLATION INSTRUCTIONS
download Set/Lock rear parking brake on bike and turn gas petcock to ‘Off’ position. Make sure vehicle is secure while installing the Nerf Bar. b) Remove and discard Foot Peg Bolts 3. Install Webbing:...
View ArticleDRIVER PEGS HONDA ADAPTOR INSTALLATION INSTRUCTIONS
download 1. Assemble the peg onto the peg adaptor by removing the allen bolt from the end of the foot peg you are using. Remove the clevis assembly (folding mechanism) from the peg itself. Assemble the...
View Article2" PEG EXTENSIONS INSTALLATION INSTRUCTIONS
download * Remove the foot peg from the folding clevis base by loosening the allen bolt at the end of the foot peg, then remove the allen bolt from the peg. * Place the new longer allen bolt thru the...
View ArticleSUZUKI M109 ADJUSTABLE HIGHWAY PEG MOUNTS Installation Instructions
download 1. Starting on the left side of the motorcycle remove the two 14mm bolts that attach the left foot peg and shifter mounting bracket to the frame. Locate the longer two of the (4) supplied...
View ArticleV-Star 1100 Floorboard/ Foot peg Extension Kit Installation Manual
download 1. Take notice of the position of the shift peg positions relative to the floorboard or foot-peg. You will be adjusting it back to these locations upon installation of the extended linkage. 2....
View Article1981-1983 Yamaha Virago 750 & 920 Installation Instructions
download Start by loosening the rear cylinder down tube bolt located on the top of the old mufflers center collector in front of the rear tire. 2. Remove both of the front cylinder exhaust pipe head...
View Article
